Product:
Development of technology for the production of carbon diamond-like nanocomposite coatings for the protection of the silicon membrane sensor elements of pressure, in aggressive environments 

Where using the proposed product (markets): The creation of industrial equipment — manufacturing tools — stand to grind titanium waste — stand for sintering titanium powder on the surface of the disk is a stand for applying nanostructured titanium carbide. All of the above equipment is widely used and, accordingly, a significant demand in engineering, construction, mining and metallurgical industries. 

The better the offered product (competitive advantages):
 — nanocarbon supports should provide the possibility of producing platinum cathode TPTE catalysts with an activity of at least two times higher than similar catalysts on standard carriers of graphite carbon black (Vulcan – X72R, Ketjen);
— platinum catalysts on CNFs should be at least two times more active compared to similar catalysts on standard carriers of graphite carbon black and provide the possibility of producing TPTE with a platinum concentration in the electrode of less than 0.2 mg / cm2
— Co / N-CNF catalysts must be active in oxygen reduction, providing a specific current of at least 0.4 mA / mg Co at E = 0.6 V

Product:
Creation of industrial equipment (processing tools, a stand for grinding titanium waste, a stand for baking titanium powder on a disk surface, a stand for applying nanostructured titanium carbide) 

Where is the proposed product used (markets):
 — in mechanical engineering, 
— in construction, 
— in mining and metallurgical industries. 

The better the offered product (competitive advantages): The best price-quality ratio. High degree of patent purity.

Product:
Creation of a plasma technology for the conversion of associated petroleum gas into carbon nanostructures with effective sorption properties. 

Where the proposed product is used (markets): 
— elimination of the environmental consequences of the development and operation of oil wells, 
— development of environmentally friendly hydrogen energy.

The better the proposed product (competitive advantages) ):
 Similar technologies do not exist yet.

Product:
Exoskeleton passive / active 
Where the proposed product is used (markets):
Our exoskeleton project allows us to help injured people, people with disabilities, elderly people who, due to their age, have problems with the musculoskeletal system . Modifications of our active exoskeleton can be reconfigured and will be able to provide significant assistance to the military, rescuers, other services operating in extreme conditions, when they perform specific tasks.
The better the offered product (competitive advantages):
The exoskeletons we developed can be either active or passive, characterized by the presence or absence of certain drives and “smart” control systems. The design of exoskeletons, control algorithms have a high degree of patent purity. Neither by type of drives, nor by the methods and algorithms of controlling them, nor by the possibilities of transformation and reconfiguration, by technical solutions of the frame structure, nodes and assemblies of the exoskeleton, we were unable to find direct analogues.

Product:
Creating the equipment for the production of environmentally friendly hydrogen energy 

Used for the proposed product (markets): 
— in the energy sector

 — in industry as a stand-alone stations (units) for the production of electrical energy (not just electricity, but also the other) 

What better product offered (competitive advantages): 

Equipment that does not have direct analogues is offered.

Product:
Creation of new nanoporous, chemical protective materials based on carbon-filled cellulose and its derivatives

Where the proposed product is used (markets):
In the chemical industry, nuclear energy, aerospace industry 

The better the offered product (competitive advantages): 
There are no direct analogues. Materials must have: — breaking load of at least 300 N; — protection against AHOV vapors (chlorine, ammonia, hydrogen sulfide, hydrogen chloride) for at least 60 minutes; — vapor permeability — not less than 60 minutes; — vapor permeability — not less than 2500 g / sq.m in 24 hours.

Product:
Providing services for cleaning an oil or gas well. 
Where the proposed product is used (markets): 
At the enterprises of the mining industry in order to increase the flow rate of the wells. 
The better the proposed product (competitive advantages):
 — Allows to reveal the flow rate of the well by 80 — 95%; 
— A relatively cheap resource (material) set during the work; 
— Lower cost of project support;
 — The technology was tested in more than 35 wells, in 88% of cases the production rate increased from 3-5 to 10-30 times (2 wells at the Daqing field in China).

Product:
Equipment for producing products of high-quality carbon compounds 

Where the proposed product is used (markets): 
Industrial enterprises for the processing of carbon raw materials (oil, gas condensate, cracking products, visbreaking, pyrolysis, coke chemistry products) 

The better the offered product (competitive advantages): 
— Allows you to use the full potential of raw materials; 
— The quality of the components of motor fuels complies with the Euro-5 standard; 
— The feedstock does not require dehydration, desalination and desulfurization; 
— The process takes place at atmospheric pressure and temperature up to 120 degrees Celsius, which, in turn, increases production safety, reduces operating costs;

— Simple hardware design;
— The absence of harmful emissions into the atmosphere and wastewater;
— Relatively low metal consumption;
— Low energy intensity;
— Lack of expensive catalysts and reagents in the technological process;
— The modular principle of the organization of the technological process allows you to smoothly increase productivity;
— The ability to create mini-plants, allowing to obtain gasoline and diesel
fractions at the production site;
— The relatively low cost of obtaining marketable products.

Product:
Creation of a waste recycling plant (MPZ) for sorting and processing solid household, industrial and food waste
 
Where the proposed product is used (markets):
Industrial enterprises using non-ferrous and ferrous metals, plastic compound, fuels and lubricants, paper, wood etc. (The global market for recyclable materials in 2010 was 600 million tons or 160 billion dollars.) 

The better the offered product (competitive advantages): 

— When installing innovative technology, it is possible to produce up to half the energy consumed by the plant at the plant, that is, consume almost is free;
 — There is an original project for organizing the production process at the plant, which makes it possible to manage with smaller areas in comparison with the proposals of competitors;
— Lower cost of project support (from construction to commissioning and staff training); about 15 — 40%.

Product:
Equipment for cryogenic grinding of materials 

Where the proposed product is used (markets): 
Industrial enterprises 

The better the offered product (competitive advantages): 
— Relatively high productivity of the equipment;
 — High range of powder processing;
 — Possibility of processing into unoxidized powders;
 — The possibility of high-quality extraction of oily crops using technology that dramatically increases the shelf life of oil;
 — The cost of equipment compared to competitors is lower by 15 — 20%.

Product:
Equipment for the production of cement. 

Where the proposed product is used (markets): 
Construction companies, factories for the production of building materials based on cement. 

The better the proposed product (competitive advantages):

 — New cement has a positive charge
— Brand strength is achieved in 24 hours.
— The hardening process takes place without steaming.
— It is possible to obtain cement with a specific surface of 2..3 m2 / g. 

— Fixed the possibility of aggregation and adhesion of particles; 
— The quality is comparable with cements having similar properties and manufactured by the company » lone Star — Indastries Inc. «, USA;

Product:
Creation of a small-tonnage plant for the production and synthesis of chemical products. 

Where is the proposed product used (markets): 
In the production of chemical. products that are in demand in:
 — industrial enterprises;
 — household chemicals for the population; 
— automobile manufacturing enterprises; 
— cosmetic industry;
 — transport enterprises;
 — construction industry. 

The better the offered product (competitive advantages): 
The best price-quality ratio. Possibility of flexible reconfiguration of technological lines for the production of a product.